| Value |
Definition |
Source |
Physical Value |
Identifier |
| Boulder |
The surface consists of boulders larger than human head size. |
ADatP-3 BL11, BL13.1 FFIRN/FUD 1423/4 adapted - Def MIP-DMSWG |
BOULDR |
1000001 |
| Clay |
The surface consists of clay. |
ADatP-3 BL11, BL13.1 FFIRN/FUD 1423/4 - Def MIP-DMSWG |
CLAY |
1000002 |
| Cobbles |
The surface consists of cobbles up to human head size. |
ADatP-3 BL11, BL13.1 FFIRN/FUD 1423/4 adapted - Def MIP-DMSWG |
COBBLS |
1000003 |
| Coral |
The surface consists of coral. |
ADatP-3 BL11, BL13.1 FFIRN/FUD 1423/4 - Def MIP-DMSWG |
CORAL |
1000004 |
| Gravel |
The surface consists of gravel. |
ADatP-3 BL11, BL13.1 FFIRN/FUD 1423/4 adapted - Def MIP-DMSWG |
GRAVEL |
1000005 |
| Limestone |
The surface consists of limestone. |
ADatP-3 BL11, BL13.1 FFIRN/FUD 1423/4 - Def MIP-DMSWG |
LMNSTN |
1000006 |
| Mud |
The surface consists of mud. |
ADatP-3 BL11, BL13.1 FFIRN/FUD 1423/4 - Def MIP-DMSWG |
MUD |
1000007 |
| Mud/smooth sand |
The surface consists of mud and smooth sand. |
Adapted ADatP-3 BL11 |
MUDSND |
1000008 |
| Pebbles |
The surface consists of pebbles up to clenched fist size. |
ADatP-3 BL11, BL13.1 FFIRN/FUD 1423/4 adapted - Def MIP-DMSWG |
PEBBLS |
1000009 |
| Rock |
The surface is made of rock, not specified. |
ADatP-3 BL11, BL13.1 FFIRN/FUD 1423/4 - Def MIP-DMSWG |
ROCK |
1000010 |
| Rough |
The surface of the bottom is uneven, with holes, bumps and folds up to 30cm and/or a lot of seaweed. |
ADatP-3 BL11, BL13.1 FFIRN/FUD 1423/4 adapted - Def MIP-DMSWG |
ROUGH |
1000011 |
| Rough, coral/rock |
The surface of the bottom is uneven and contains outcrops of rock and or coral. |
Adapted ADatP-3 BL11 |
RGHCRL |
1000012 |
| Sand |
The surface consists of fine sand up to pinhead size. |
ADatP-3 BL11, BL13.1 FFIRN/FUD 1423/4 adapted - Def MIP-DMSWG |
SAND |
1000013 |
| Sand, coarse |
The surface consists of sand between 0.5 and 2.0 mm in size. |
ADatP-3 BL11, BL13.1 FFIRN/FUD 1423/4 adapted - Def MIP-DMSWG |
SANDCR |
1000014 |
| Sand, fine |
The surface consists of sand between 0.125 and 0.25mm in size. |
ADatP-3 BL11, BL13.1 FFIRN/FUD 1423/4 adapted - Def MIP-DMSWG |
SANDFN |
1000015 |
| Sand, medium |
The surface consists of sand between 0.25 and 0.5mm in size. |
ADatP-3 BL11, BL13.1 FFIRN/FUD 1423/4 adapted - Def MIP-DMSWG |
SANDMD |
1000016 |
| Sand, very coarse |
The surface consists of sand up to 72mm in size. |
ADatP-3 BL11, BL13.1 FFIRN/FUD 1423/4 adapted - Def MIP-DMSWG |
SANDVC |
1000017 |
| Sand, very fine |
The surface consists of sand between 0.063 and 0.125mm in size. |
ADatP-3 BL11, BL13.1 FFIRN/FUD 1423/4 adapted - Def MIP-DMSWG |
SANDVF |
1000018 |
| Smooth and flat |
The surface is stable and smooth and contains ripples of less than 15cm. |
ADatP-3 BL13.1 FFIRN/FUD 1423/3 adapted - Def MIP-DMSWG |
SMTHFL |
1000019 |
| Stable and smooth |
The surface is stable and smooth and contains holes, bumps and folds up to 30cm. |
ADatP-3 BL13.1 FFIRN/FUD 1423/3 adapted - Def MIP-DMSWG |
STBLSM |
1000020 |
| Not otherwise specified |
The appropriate value is not in the set of specified values. |
ATCCIS |
NOS |
1000021 |